B.E. / B.Tech ELECTRICAL AND ELECTRONICS ENGINEERING Curriculum & Syllabi Regulation 2008
B.E. / B.Tech ELECTRICAL AND ELECTRONICS ENGINEERING
Curriculum & Syllabi Regulation 2008
FULLY EDUCATIONAL WEBSITE
Got Frustrated of the Exams...???
Searching for sample Question Papers...???
Good Bye to hard work and Hai to smart work...
Anna University Exam Time Table for Nov/Dec 2014, Jan 2015 Exams - 3rd, 5th, 7th sem| Timetable Link1| Timetable Link2-
Anna Univ. UG/PG Nov/Dec 2013 revaluation results| Revaluation Link1Updated Results
Showing posts with label syllabus EEE. Show all posts
EE2028 POWER QUALITY, EE2036 FLEXIBLE AC TRANSMISSION & EE2451 ELECTRIC ENERGY GENERATION syllabus EEE,
total harmonic distortion
sag interrupts
cause and effects of sag
portions: unit 2 and 4
sag interrupts
cause and effects of sag
portions: unit 2 and 4
Attachments (3
EE2252 POWER PLANT ENGINEERING SYLLABI
EE2252 POWER PLANT ENGINEERING SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
TEXT BOOKS
1. A Course in Power Plant Engineering by Arora and Domkundwar, Dhanpat Rai and Co.Pvt.Ltd., New Delhi.
2. Power Plant Engineering by P.K. Nag, Tata McGraw Hill, Second Edition , Fourth reprint 2003.
REFERENCES:
1. Power station Engineering and Economy by Bernhardt G.A.Skrotzki and William A. Vopat- Tata McGraw Hill Publishing Company Ltd., New Delhi, 20th reprint 2002.
2. An introduction to power plant technology by G.D. Rai-Khanna Publishers, Delhi- 110 005.
3. Power Plant Technology, M.M. El-Wakil McGraw Hill 1984.
EE2252 POWER PLANT ENGINEERING
AIM
Expose the students to basics of various power plants so that they will have the comprehensive idea of power system operation.
OBJECTIVES
To become familiar with operation of various power plants.
UNIT I THERMAL POWER PLANTS
Basic thermodynamic cycles, various components of steam power plant-layout-pulverized coal burners- Fluidized bed combustion-coal handling systems-ash handling systems- Forced draft and induced draft fans- Boilers-feed pumps-super heater- regenerator-condenser- dearearators-cooling tower
UNIT II HYDRO ELECTRIC POWER PLANTS
Layout-dams-selection of water turbines-types-pumped storage hydel plants
UNIT II I NUCLEAR POWER PLANTS
Principles of nuclear energy- Fission reactions-nuclear reactor-nuclear power plants
UNIT IV GAS AND DIESEL POWER PLANTS
Types, open and closed cycle gas turbine, work output & thermal efficiency, methods to improve performance-reheating, intercoolings, regeneration-advantage and disadvantages- Diesel engine power plant-component and layout
UNIT V NON-CONVENTIONAL POWER GENERATION
Solar energy collectors, OTEC, wind power plants, tidal power plants and geothermal resources, fuel cell, MHD power generation-principle, thermoelectric power generation, thermionic power generation
Expose the students to basics of various power plants so that they will have the comprehensive idea of power system operation.
OBJECTIVES
To become familiar with operation of various power plants.
UNIT I THERMAL POWER PLANTS
Basic thermodynamic cycles, various components of steam power plant-layout-pulverized coal burners- Fluidized bed combustion-coal handling systems-ash handling systems- Forced draft and induced draft fans- Boilers-feed pumps-super heater- regenerator-condenser- dearearators-cooling tower
UNIT II HYDRO ELECTRIC POWER PLANTS
Layout-dams-selection of water turbines-types-pumped storage hydel plants
UNIT II I NUCLEAR POWER PLANTS
Principles of nuclear energy- Fission reactions-nuclear reactor-nuclear power plants
UNIT IV GAS AND DIESEL POWER PLANTS
Types, open and closed cycle gas turbine, work output & thermal efficiency, methods to improve performance-reheating, intercoolings, regeneration-advantage and disadvantages- Diesel engine power plant-component and layout
UNIT V NON-CONVENTIONAL POWER GENERATION
Solar energy collectors, OTEC, wind power plants, tidal power plants and geothermal resources, fuel cell, MHD power generation-principle, thermoelectric power generation, thermionic power generation
L = 45 T = 15 TOTAL = 60 PERIODS
TEXT BOOKS
1. A Course in Power Plant Engineering by Arora and Domkundwar, Dhanpat Rai and Co.Pvt.Ltd., New Delhi.
2. Power Plant Engineering by P.K. Nag, Tata McGraw Hill, Second Edition , Fourth reprint 2003.
REFERENCES:
1. Power station Engineering and Economy by Bernhardt G.A.Skrotzki and William A. Vopat- Tata McGraw Hill Publishing Company Ltd., New Delhi, 20th reprint 2002.
2. An introduction to power plant technology by G.D. Rai-Khanna Publishers, Delhi- 110 005.
3. Power Plant Technology, M.M. El-Wakil McGraw Hill 1984.
EE 2251 ELECTRICAL MACHINES – I SYLLABI
EE 2251 ELECTRICAL MACHINES – I SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
EE 2251 ELECTRICAL MACHINES – I
AIM
To expose the students to the basic principles of Electro mechanical Energy Conversion in Electrical Apparatus and the operation of Transformers and DC Machines.
OBJECTIVES
i. To familiarize the constructional details, the principle of operation, prediction of performance, the methods of testing the transformers and three phase transformer connections.
ii. To introduce the principles of electromechanical energy conversion in singly and multiply excited systems.
iii. To study the working principles of electrical machines using the concepts of electromechanical energy conversion principles and derive expressions for generated voltage and torque developed in all Electrical Machines.
iv. To study the working principles of DC machines as Generator and Motor, types, determination of their no-load/load characteristics, starting and methods of speed control of motors.
v. To estimate the various losses taking place in D.C. machines and to study the different testing methods to arrive at their performance.
UNIT I INTRODUCTION 6
Electrical machine types – Magnetic circuits – Inductance – Statically and Dynamically induced EMF - Torque – Hysteresis- Core losses - AC operation of magnetic circuits.
UNIT II TRANSFORMERS 10
Construction – principle of operation – equivalent circuit – losses – testing – efficiency and voltage regulation – auto transformer – three phase connections – parallel operation of transformers – tap changing.
UNIT III ELECTROMECHANICAL ENERGY CONVERSION 9
Energy in magnetic systems – field energy, coenergy and mechanical force – singly and multiply excited systems.
UNIT IV BASIC CONCEPTS IN ROTATING MACHINES 9
Generated voltages in ac and dc machines, mmf of distributed windings – magnetic fields in rotating machines – rotating mmf waves – torque in ac and dc machines.
UNIT V DC MACHINES 11
Construction – EMF and torque – circuit model – armature reaction – commutation – methods of excitation – characteristics of generators – characteristics of motors – starting and speed control – testing and efficiency – parallel operation.
1. Nagrath I. J and Kothari D. P. ‘Electric Machines’, Tata McGraw Hill Publishing Company Ltd, 1990.
2. P.S. Bimbhra, ‘Electrical Machinery’, Khanna Publishers, 2003.
REFERENCES:
1. Fitzgerald.A.E., Charles Kingsely Jr, Stephen D.Umans, ‘Electric Machinery’, McGraw Hill Books Company, 1992.
2. P. C. Sen., ‘Principles of Electrical Machines and Power Electronics’, John Wiley&Sons, 1997.
3. K. Murugesh Kumar, ‘Electric Machines’, Vikas publishing house Pvt Ltd, 2002.
To expose the students to the basic principles of Electro mechanical Energy Conversion in Electrical Apparatus and the operation of Transformers and DC Machines.
OBJECTIVES
i. To familiarize the constructional details, the principle of operation, prediction of performance, the methods of testing the transformers and three phase transformer connections.
ii. To introduce the principles of electromechanical energy conversion in singly and multiply excited systems.
iii. To study the working principles of electrical machines using the concepts of electromechanical energy conversion principles and derive expressions for generated voltage and torque developed in all Electrical Machines.
iv. To study the working principles of DC machines as Generator and Motor, types, determination of their no-load/load characteristics, starting and methods of speed control of motors.
v. To estimate the various losses taking place in D.C. machines and to study the different testing methods to arrive at their performance.
UNIT I INTRODUCTION 6
Electrical machine types – Magnetic circuits – Inductance – Statically and Dynamically induced EMF - Torque – Hysteresis- Core losses - AC operation of magnetic circuits.
UNIT II TRANSFORMERS 10
Construction – principle of operation – equivalent circuit – losses – testing – efficiency and voltage regulation – auto transformer – three phase connections – parallel operation of transformers – tap changing.
UNIT III ELECTROMECHANICAL ENERGY CONVERSION 9
Energy in magnetic systems – field energy, coenergy and mechanical force – singly and multiply excited systems.
UNIT IV BASIC CONCEPTS IN ROTATING MACHINES 9
Generated voltages in ac and dc machines, mmf of distributed windings – magnetic fields in rotating machines – rotating mmf waves – torque in ac and dc machines.
UNIT V DC MACHINES 11
Construction – EMF and torque – circuit model – armature reaction – commutation – methods of excitation – characteristics of generators – characteristics of motors – starting and speed control – testing and efficiency – parallel operation.
L = 45 T = 15 TOTAL = 60 PERIODS
TEXT BOOKS: 1. Nagrath I. J and Kothari D. P. ‘Electric Machines’, Tata McGraw Hill Publishing Company Ltd, 1990.
2. P.S. Bimbhra, ‘Electrical Machinery’, Khanna Publishers, 2003.
REFERENCES:
1. Fitzgerald.A.E., Charles Kingsely Jr, Stephen D.Umans, ‘Electric Machinery’, McGraw Hill Books Company, 1992.
2. P. C. Sen., ‘Principles of Electrical Machines and Power Electronics’, John Wiley&Sons, 1997.
3. K. Murugesh Kumar, ‘Electric Machines’, Vikas publishing house Pvt Ltd, 2002.
MG2351 PRINCIPLES OF MANAGEMENT SYLLABI
MG2351 PRINCIPLES OF MANAGEMENT SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
MG2351 PRINCIPLES OF MANAGEMENT
UNIT I OVERVIEW OF MANAGEMENT 9
Organization - Management - Role of managers - Evolution of Management thought - Organization and the environmental factors - Managing globally - Strategies for International Business.
UNIT II PLANNING 9
Nature and purpose of planning - Planning process - Types of plans – Objectives - Managing by objective (MBO) Strategies - Types of strategies - Policies - Decision Making - Types of decision - Decision Making Process - Rational Decision Making Process - Decision Making under different conditions.
UNIT III ORGANIZING 9
Nature and purpose of organizing - Organization structure - Formal and informal groups I organization - Line and Staff authority - Departmentation - Span of control - Centralization and Decentralization - Delegation of authority - Staffing - Selection and Recruitment - Orientation - Career Development - Career stages – Training - Performance Appraisal.
UNIT IV DIRECTING 9
Creativity and Innovation - Motivation and Satisfaction - Motivation Theories Leadership - Leadership theories - Communication - Hurdles to effective communication - Organization Culture - Elements and types of culture - Managing cultural diversity.
UNIT V CONTROLLING 9
Process of controlling - Types of control - Budgetary and non-budgetary control techniques - Managing Productivity - Cost Control - Purchase Control - Maintenance Control - Quality Control - Planning operations.
TEXT BOOKS:
1. Stephen P. Robbins and Mary Coulter, 'Management', Prentice Hall of India, 8th edition.
2. Charles W L Hill, Steven L McShane, 'Principles of Management', Mcgraw Hill Education, Special Indian Edition, 2007.
REFERENCES:
1. Hellriegel, Slocum & Jackson, ' Management - A Competency Based Approach', Thomson South Western, 10th edition, 2007.
2. Harold Koontz, Heinz Weihrich and Mark V Cannice, ‘Management – A global & Entrepreneurial Perspective’, Tata Mcgraw Hill, 12th edition, 2007.
3. Andrew J. Dubrin, 'Essentials of Management', Thomson Southwestern, 7th edition, 2007.
Organization - Management - Role of managers - Evolution of Management thought - Organization and the environmental factors - Managing globally - Strategies for International Business.
UNIT II PLANNING 9
Nature and purpose of planning - Planning process - Types of plans – Objectives - Managing by objective (MBO) Strategies - Types of strategies - Policies - Decision Making - Types of decision - Decision Making Process - Rational Decision Making Process - Decision Making under different conditions.
UNIT III ORGANIZING 9
Nature and purpose of organizing - Organization structure - Formal and informal groups I organization - Line and Staff authority - Departmentation - Span of control - Centralization and Decentralization - Delegation of authority - Staffing - Selection and Recruitment - Orientation - Career Development - Career stages – Training - Performance Appraisal.
UNIT IV DIRECTING 9
Creativity and Innovation - Motivation and Satisfaction - Motivation Theories Leadership - Leadership theories - Communication - Hurdles to effective communication - Organization Culture - Elements and types of culture - Managing cultural diversity.
UNIT V CONTROLLING 9
Process of controlling - Types of control - Budgetary and non-budgetary control techniques - Managing Productivity - Cost Control - Purchase Control - Maintenance Control - Quality Control - Planning operations.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Stephen P. Robbins and Mary Coulter, 'Management', Prentice Hall of India, 8th edition.
2. Charles W L Hill, Steven L McShane, 'Principles of Management', Mcgraw Hill Education, Special Indian Edition, 2007.
REFERENCES:
1. Hellriegel, Slocum & Jackson, ' Management - A Competency Based Approach', Thomson South Western, 10th edition, 2007.
2. Harold Koontz, Heinz Weihrich and Mark V Cannice, ‘Management – A global & Entrepreneurial Perspective’, Tata Mcgraw Hill, 12th edition, 2007.
3. Andrew J. Dubrin, 'Essentials of Management', Thomson Southwestern, 7th edition, 2007.
EE2402 PROTECTION AND SWITCHGEARSYLLABI
EE2402 PROTECTION AND SWITCHGEARSYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
To introduce the students to the various abnormal operating conditions in power system and describe the apparatus and system protection schemes. Also to describe the phenomena of current interruption to study the various switchgears.
OBJECTIVES:
i. To discuss the causes of abnormal operating conditions (faults, lightning and switching surges) of the apparatus and system.
ii. To understand the characteristics and functions of relays and protection schemes.
iii. To understand the problems associated with circuit interruption by a circuit breaker.
UNIT I INTRODUCTION 9
Importance of protective schemes for electrical apparatus and power system. Qualitative review of faults and fault currents - relay terminology – definitions - and essential qualities of protection. Protection against over voltages due to lightning and switching - arcing grounds - Peterson Coil - ground wires - surge absorber and diverters Power System earthing – neutral Earthing - basic ideas of insulation coordination.
UNIT II OPERATING PRINCIPLES AND RELAY CHARACTERISTICS 9
Electromagnetic relays – over current, directional and non-directional, distance, negative sequence, differential and under frequency relays – Introduction to static relays.
UNIT III APPARATUS PROTECTION 9
Main considerations in apparatus protection - transformer, generator and motor protection - protection of busbars. Transmission line protection - zones of protection. CTs and PTs and their applications in protection schemes.
UNIT IV THEORY OF CIRCUIT INTERRUPTION 9
Physics of arc phenomena and arc interruption. DC and AC circuit breaking - restriking voltage and recovery voltage - rate of rise of recovery voltage - resistance switching - current chopping - interruption of capacitive current.
UNIT V CIRCUIT BREAKERS 9
Types of circuit breakers – air blast, air break, oil, SF6 and vacuum circuit breakers – comparative merits of different circuit breakers – testing of circuit breakers.
2. R.K.Rajput, A Tex book of Power System Engineering. Laxmi Publications, First Edition Reprint 2007.
REFERENCES:
1. Sunil S. Rao, ‘Switchgear and Protection’, Khanna publishers, New Delhi, 1986.
2. C.L. Wadhwa, ‘Electrical Power Systems’, Newage International (P) Ltd., 2000.
3. B. Ravindranath, and N. Chander, ‘Power System Protection & Switchgear’, Wiley Eastern Ltd., 1977.
4. Badri Ram, Vishwakarma, ‘Power System Protection and Switchgear’, Tata McGraw Hill, 2001.
5. Y.G. Paithankar and S.R. Bhide, ‘Fundamentals of Power System Protection’, Prentice Hall of India Pvt. Ltd., New Delhi–110001, 2003.
EE2402 PROTECTION AND SWITCHGEAR
AIM:To introduce the students to the various abnormal operating conditions in power system and describe the apparatus and system protection schemes. Also to describe the phenomena of current interruption to study the various switchgears.
OBJECTIVES:
i. To discuss the causes of abnormal operating conditions (faults, lightning and switching surges) of the apparatus and system.
ii. To understand the characteristics and functions of relays and protection schemes.
iii. To understand the problems associated with circuit interruption by a circuit breaker.
UNIT I INTRODUCTION 9
Importance of protective schemes for electrical apparatus and power system. Qualitative review of faults and fault currents - relay terminology – definitions - and essential qualities of protection. Protection against over voltages due to lightning and switching - arcing grounds - Peterson Coil - ground wires - surge absorber and diverters Power System earthing – neutral Earthing - basic ideas of insulation coordination.
UNIT II OPERATING PRINCIPLES AND RELAY CHARACTERISTICS 9
Electromagnetic relays – over current, directional and non-directional, distance, negative sequence, differential and under frequency relays – Introduction to static relays.
UNIT III APPARATUS PROTECTION 9
Main considerations in apparatus protection - transformer, generator and motor protection - protection of busbars. Transmission line protection - zones of protection. CTs and PTs and their applications in protection schemes.
UNIT IV THEORY OF CIRCUIT INTERRUPTION 9
Physics of arc phenomena and arc interruption. DC and AC circuit breaking - restriking voltage and recovery voltage - rate of rise of recovery voltage - resistance switching - current chopping - interruption of capacitive current.
UNIT V CIRCUIT BREAKERS 9
Types of circuit breakers – air blast, air break, oil, SF6 and vacuum circuit breakers – comparative merits of different circuit breakers – testing of circuit breakers.
TOTAL : 45 PERIODS
TEXT BOOKS: 1. M.L. Soni, P.V. Gupta, V.S. Bhatnagar, A. Chakrabarti, ‘A Text Book on Power System Engineering’, Dhanpat Rai & Co., 1998. (For All Chapters 1, 2, 3, 4 and 5).2. R.K.Rajput, A Tex book of Power System Engineering. Laxmi Publications, First Edition Reprint 2007.
REFERENCES:
1. Sunil S. Rao, ‘Switchgear and Protection’, Khanna publishers, New Delhi, 1986.
2. C.L. Wadhwa, ‘Electrical Power Systems’, Newage International (P) Ltd., 2000.
3. B. Ravindranath, and N. Chander, ‘Power System Protection & Switchgear’, Wiley Eastern Ltd., 1977.
4. Badri Ram, Vishwakarma, ‘Power System Protection and Switchgear’, Tata McGraw Hill, 2001.
5. Y.G. Paithankar and S.R. Bhide, ‘Fundamentals of Power System Protection’, Prentice Hall of India Pvt. Ltd., New Delhi–110001, 2003.
EE2401 POWER SYSTEM OPERATION AND CONTROL SYLLABI
EE2401 POWER SYSTEM OPERATION AND CONTROL SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
EE2401 POWER SYSTEM OPERATION AND CONTROL
AIM:
To understand the day to day operation of power system and the control actions to be implemented on the system to meet the minute-to-minute variation of system load demand.
OBJECTIVES:
i. To have an overview of power system operation and control.
ii. To model power-frequency dynamics and to design power-frequency controller.
iii. To model reactive power-voltage interaction and the control actions to be implemented for maintaining the voltage profile against varying system load.
UNIT I INTRODUCTION 9
System load – variation - load characteristics - load curves and load-duration curve (daily, weekly and annual) - load factor - diversity factor. Importance of load forecasting and simple techniques of forecasting. An overview of power system operation and control and the role of computers in the implementation. (Qualitative treatment with block diagram).
UNIT II REAL POWER - FREQUENCY CONTROL 9
Basics of speed governing mechanism and modeling - speed-load characteristics – load sharing between two synchronous machines in parallel. Control area concept LFC control of a single- area system. Static and dynamic analysis of uncontrolled and controlled cases. Integration of economic dispatch control with LFC. Two-area system – modeling - static analysis of uncontrolled case - tie line with frequency bias control of two-area system - state variable model.
UNIT III REACTIVE POWER–VOLTAGE CONTROL 9
level control using generator voltage magnitude setting, tap setting of OLTC transformer and MVAR injection of switched capacitors to maintain acceptable voltage profile and to minimize transmission loss. Basics of reactive power control. Excitation systems – modeling. Static and dynamic analysis - stability compensation - generation and absorption of reactive power. Relation between voltage, power and reactive power at a node - method of voltage control - tap-changing transformer. System
UNIT IV UNIT COMMITMENT AND ECONOMIC DISPATCH 9
Statement of economic dispatch problem – cost of generation – incremental cost curve co-ordination equations without loss and with loss, solution by direct method and λ-iteration method. (No derivation of loss coefficients). Statement of Unit Commitment problem – constraints; spinning reserve, thermal unit constraints, hydro constraints, fuel constraints and other constraints. Solution methods - Priority-list methods - forward dynamic programming approach. Numerical problems only in priority-list method using full-load average production cost.
UNIT V COMPUTER CONTROL OF POWER SYSTEMS 9
Need of computer control of power systems. Concept of energy control centre (or) load dispatch centre and the functions - system monitoring - data acquisition and control. System hardware configuration – SCADA and EMS functions. Network topology - state estimation - security analysis and control. Various operating states (Normal, alert, emergency, in-extremis and restorative). State transition diagram showing various state transitions and control strategies.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Allen. J. Wood and Bruce F. Wollenberg, ‘Power Generation, Operation and Control’, John Wiley & Sons, Inc., 2003.
2. Chakrabarti & Halder, “Power System Analysis: Operation and Control”, Prentice Hall of India, 2004 Edition.
REFERENCES
1. D.P. Kothari and I.J. Nagrath, ‘Modern Power System Analysis’, Third Edition, Tata McGraw Hill Publishing Company Limited, New Delhi, 2003. (For Chapters 1, 2 & 3)
2. L.L. Grigsby, ‘The Electric Power Engineering, Hand Book’, CRC Press & IEEE Press, 2001.
3. Hadi Saadat, “Power System Analysis”, (For the chapters 1, 2, 3 and 4)11th Reprint 2007.
4. P.Kundur, ‘Power System Stability and Control’ MC Craw Hill Publisher, USA, 1994.
5. Olle.I.Elgerd, ‘Electric Energy Systems theory An introduction’ Tata McGraw Hill Publishing Company Ltd. New Delhi, Second Edition 2003.
1. Allen. J. Wood and Bruce F. Wollenberg, ‘Power Generation, Operation and Control’, John Wiley & Sons, Inc., 2003.
2. Chakrabarti & Halder, “Power System Analysis: Operation and Control”, Prentice Hall of India, 2004 Edition.
REFERENCES
1. D.P. Kothari and I.J. Nagrath, ‘Modern Power System Analysis’, Third Edition, Tata McGraw Hill Publishing Company Limited, New Delhi, 2003. (For Chapters 1, 2 & 3)
2. L.L. Grigsby, ‘The Electric Power Engineering, Hand Book’, CRC Press & IEEE Press, 2001.
3. Hadi Saadat, “Power System Analysis”, (For the chapters 1, 2, 3 and 4)11th Reprint 2007.
4. P.Kundur, ‘Power System Stability and Control’ MC Craw Hill Publisher, USA, 1994.
5. Olle.I.Elgerd, ‘Electric Energy Systems theory An introduction’ Tata McGraw Hill Publishing Company Ltd. New Delhi, Second Edition 2003.
EC2314 DIGITAL SIGNAL PROCESSING SYLLABI
EC2314 DIGITAL SIGNAL PROCESSING SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
EC2314 DIGITAL SIGNAL PROCESSING
AIM
To introduce the concept of analyzing discrete time signals & systems in the time and frequency domain.
OBJECTIVES
· To classify signals and systems & their mathematical representation.
· To analyse the discrete time systems.
· To study various transformation techniques & their computation.
· To study about filters and their design for digital implementation.
· To study about a programmable digital signal processor & quantization effects.
UNIT I INTRODUCTION 9
Classification of systems: Continuous, discrete, linear, causal, stable, dynamic, recursive, time variance; classification of signals: continuous and discrete, energy and power; mathematical representation of signals; spectral density; sampling techniques, quantization, quantization error, Nyquist rate, aliasing effect. Digital signal representation.
UNIT II DISCRETE TIME SYSTEM ANALYSIS 9
Z-transform and its properties, inverse z-transforms; difference equation – Solution by z-transform, application to discrete systems - Stability analysis, frequency response – Convolution – Fourier transform of discrete sequence – Discrete Fourier series.
UNIT III DISCRETE FOURIER TRANSFORM & COMPUTATION 9
DFT properties, magnitude and phase representation - Computation of DFT using FFT algorithm – DIT & DIF - FFT using radix 2 – Butterfly structure.
FIR & IIR filter realization – Parallel & cascade forms. FIR design: Windowing Techniques – Need and choice of windows – Linear phase characteristics. IIR design: Analog filter design - Butterworth and Chebyshev approximations; digital design using impulse invariant and bilinear transformation - Warping, prewarping - Frequency transformation.
UNIT V DIGITAL SIGNAL PROCESSORS 9
Introduction – Architecture – Features – Addressing Formats – Functional modes - Introduction to
Commercial Processors
L = 45 T = 15 TOTAL = 60 PERIODS
TEXT BOOKS
1. J.G. Proakis and D.G. Manolakis, ‘Digital Signal Processing Principles, Algorithms and Applications’, Pearson Education, New Delhi, 2003 / PHI.
2. S.K. Mitra, ‘Digital Signal Processing – A Computer Based Approach’, Tata McGraw Hill, New Delhi, 2001.
EE2204 DATA STRUCTURES AND ALGORITHMS SYLLABI
EE2204 DATA STRUCTURES AND ALGORITHMS SYLLABI
ANNA UNIVERSITY, CHENNAI
AFFILIATED INSTITUTIONS
R - 2008
B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
EE2204 DATA STRUCTURES AND ALGORITHMS
AIM:
To master the design and applications of linear, tree, and graph structures. To understand various algorithm design and analysis techniques.
UNIT I LINEAR STRUCTURES 9
Abstract Data Types (ADT) – List ADT – array-based implementation – linked list implementation – cursor-based linked lists – doubly-linked lists – applications of lists – Stack ADT – Queue ADT – circular queue implementation – Applications of stacks and queues
UNIT II TREE STRUCTURES 9
Need for non-linear structures – Tree ADT – tree traversals – left child right sibling data structures for general trees – Binary Tree ADT – expression trees – applications of trees – binary search tree ADT
UNIT III BALANCED SEARCH TREES AND INDEXING 9
AVL trees – Binary Heaps – B-Tree – Hashing – Separate chaining – open addressing – Linear probing
AVL trees – Binary Heaps – B-Tree – Hashing – Separate chaining – open addressing – Linear probing
UNIT IV GRAPHS 9
UNIT V ALGORITHM DESIGN AND ANALYSIS 9
TEXT BOOKS
1. M. A. Weiss, “Data Structures and Algorithm Analysis in C”, Pearson Education Asia, 2002.
2. ISRD Group, “Data Structures using C”, Tata McGraw-Hill Publishing Company Ltd., 2006.
REFERENCES
1. A. V. Aho, J. E. Hopcroft, and J. D. Ullman, “Data Structures and Algorithms”, Pearson
Education, 1983.
2. R. F. Gilberg, B. A. Forouzan, “Data Structures: A Pseudocode approach with C”, Second
Edition, Thomson India Edition, 2005.
3. Sara Baase and A. Van Gelder, “Computer Algorithms”, Third Edition, Pearson Education, 2000.
4. T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein, "Introduction to algorithms", Second
Edition, Prentice Hall of India Ltd, 2001.
Definitions – Topological sort – breadth-first traversal - shortest-path algorithms – minimum spanning tree – Prim's and Kruskal's algorithms – Depth-first traversal – biconnectivity – euler circuits – applications of graphs
UNIT V ALGORITHM DESIGN AND ANALYSIS 9
Greedy algorithms – Divide and conquer – Dynamic programming – backtracking – branch and bound – Randomized algorithms – algorithm analysis – asymptotic notations – recurrences – NP- complete problems
L : 15 TOTAL : 45 PERIODS
TEXT BOOKS
1. M. A. Weiss, “Data Structures and Algorithm Analysis in C”, Pearson Education Asia, 2002.
2. ISRD Group, “Data Structures using C”, Tata McGraw-Hill Publishing Company Ltd., 2006.
REFERENCES
1. A. V. Aho, J. E. Hopcroft, and J. D. Ullman, “Data Structures and Algorithms”, Pearson
Education, 1983.
2. R. F. Gilberg, B. A. Forouzan, “Data Structures: A Pseudocode approach with C”, Second
Edition, Thomson India Edition, 2005.
3. Sara Baase and A. Van Gelder, “Computer Algorithms”, Third Edition, Pearson Education, 2000.
4. T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein, "Introduction to algorithms", Second
Edition, Prentice Hall of India Ltd, 2001.
Subscribe to:
Posts (Atom)
EEE ENGINEERING NOTES
